The ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 moisture contet sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe.

ONLY AVAILABLE WITH MINIMUM QUANTITY
The product comes with minimum quantity of 2 units.

The ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between AMP-2 sensor board and the main controller.

ONLY AVAILABLE WITH MINIMUM QUANTITY
The product comes with minimum quantity of 3 units.

The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling. devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2. The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.

ONLY AVAILABLE IN CASES
The product comes in case-wise packing of 8 units.

Connected Temperature & Humidity Reporting

PCT-1 Reservoir EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and reliable that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.

The OA6-110 control board is designed to control small 110V pump or solenoid valves (less than 1.5 amps). The OA6-110 has 6 separately controlled 120 volt outlets. Each has an LED indicator to show whether the outlet is On or Off.  Up to (5) of the OA6-110 modules can be connected to a single Aqua-X.

The TrolMaster Aqua-X 24v (OA6-24) control board is designed to control multiple 24vac solenoid valves.

It provides an easy and efficient method to control up to 6 valves… each with individual timer settings. Up to 5 OA6-24 can be connected to a single Aqua-x providing a maximum of 30 individually controlled outputs to connect to your solenoid valves. The Aqua-x can also provide a “master pump link” by using a DSP-1 along with the OA6-24. Connecting a DSP-1 to the OA6-24 provides an automatic “pump link” between the DSP-1 and the OA6-24. When any of the 24vac irrigation zones are activated on the OA6-24, the DSP-1 will automatically turn on the pump.

The Aqua-X Controller is the main controller of the Aqua-X irrigation control system. With the combination of pH Sensor and EC/Temp Sensor, Aqua-X can monitor the pH, EC and Temp levels of the nutrient. With the use of 110V control board and 24V control board, the system could manage up to 30 individual outputs for multiple watering schedules. With the innovative water detectors, the system could monitor each watering schedules with alerts for watering confirmation.

PCT-2 Inline EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the input terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.

PPH-1 Reservoir pH Sensor is specially designed for Aqua-X Irrigation Control System. The pH electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and reliable that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the pH level of your water.

The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-x. The PPH-2 probe is a commercially rated probe and it connects to the Aqua-x via the AMP-2. It is intended to be used inline with existing pvc piping and also can be placed into an water tank.

The AMP-2 module connects the Aqua-x to a set of precision pH / EC & temperature probes to constantly measure the pH / EC & temperature of the water being sampled. The AMP-2 works with the TrolMaster PCT-1&2 and the PPH-1&2 probes. Once connected to the Aqua-x, the AMP-2 will display the sensor data on the Aqua-x and on the APP. The minimum and maximum “limits” can be set on the Aqua-x providing 24/7 notification of pH / EC or temperatures that are out of limits.

Additional detector can be added to the WD-1 by using the TSS-1 / T-splitter and water detector (sensor) set. It comes with a T-splitter and an additional water detector in order to have multiple points to detect water by using a single WD-1 module. This is useful when trying to monitor for water spills or floods, or to monitor water run-off at multiple locations.

ONLY AVAILABLE WITH MINIMUM QUANTITY
The product comes with minimum quantity of 2 units.

The TSS-2 extension cable is simply a 16 ft extension cable to use with the WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or distance between WD-1 module and the sensor).

ONLY AVAILABLE WITH MINIMUM QUANTITY
The product comes with minimum quantity of 3 units.

The WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor the floor or a space for water, as a leak-detector. The other way the WC-1 can be used is as a water-verification monitor. When used in this way, the water detector is placed where runoff will accumulate (or where water is being introduced to the growing medium).

The TrolMaster Carbon-X system provides critical monitoring of CO2 levels for up to 13 separate zones / rooms. The system can have both high level (up to 30,000ppm) alerts, as well as low level (5,000ppm) alerts. Both high and low level limits are user-adjustable to meet local regulations for supplemental CO2 use indoors.
The Carbon-X system can also control various devices such as ventilation fans, dampers, main CO2 valves as well as to send a signal to the fire department by interfacing to the fire / alarm panel in the facility. Automatic shut-off of CO2 is accomplished by wiring the facility’s main CO2 solenoid in series with one of the system control modules. The settings for each of the devices connected to the system are user-selectable for easy customization.

The AS-2 CO2 Alarm Station combines an audio-visual alarm module with a color-coded LED display indicator and a LCD digital ppm level reading. It is designed to be mounted outside of the space to be monitored, and will display the CO2 ppm level. The DSA-1 can be linked to either the low or the high level CO2 sensors, or it can linked to both sensors for complete redundancy.

The AS-1 CO2 Alarm Station is an audio/visual alarm to be mounted inside or outside the room to be monitored, and sound an alarm (both visible and audible) in the event of the CO2 level going above normal or safe levels. It can be linked to either low or the high level CO2 sensors, or it can be linked to both sensors for complete redundancy