Day Night CO2 Monitor & Controller for Greenhouses

Product Overview:

The Day/Night CO2 Controller can be used in greenhouses, grow rooms, hydroponics rooms, and other places where elevated carbon dioxide levels are used to maximize plant growth.

• Accurate CO2 Generator Control
• Photo Sensor Turns off CO2 at Night
• Easy Fresh-Air Calibration

Best of all, the CO2 Monitor & Controller is easy to install and use. Simply mount the unit inside your grow room, (all cables and hardware included), plug it into a standard wall jack, plug in your CO2 generator or regulator and it is ready to maximize your plant growing yields.

Product Specification:

• Large digital LCD display clearly indicates the current CO2 level and temperature
• Easy to read display with all functions set from 3 push buttons
• Power, upper limit, lower limit and photo sensor verification LEDs
• Non-UV Emitting LED’s – no interference with the grow cycle
• IP54 Enclosure – cover during cleaning, fertilization, or washdown
• Default settings: Low Set Point – 800 ppm. High Set Point – 1,500 ppm
• Measurement Range: 0-10,000ppm
• NDIR CO2 Sensing Technology
• Accuracy: ± 70ppm or ± 5% CO2
• Sensor Response Time: < 2 minutes
• Operating Temperature: 32° to 122° F
• Calibration: In-situ with fresh air
• Sensor Life Expectancy: 15 years
• Relay: One Relay output, Peak Current < 5A@ 250 VAC, SPST. Normally Open
• Max Coverage Area: 1,500 sq.ft. with proper air handling

Electrical

• Power: 110VAC Grounded US Plug Only
• Power Consumption:2 Watts Maximum
• Piggyback Cable: Peak Current < 5A @ 250 VAC

Warranty

• 1 year – See CO2Meter Terms and Conditions.