Nanolux RF Filter Set

NANOLUX RF FILTER SETS ARE DESIGNED FOR SINGLE ENDED LAMP BALLASTS- FILTERS NOT TO BE USED ON THE OUTPUT SIDE OF DE HIGH FREQUENCY BALLASTS. 

The RF Filter set is a product of necessity. Over the past year the FCC has come down hard on electronic ballast manufacturers. Until recently electronic ballasts received little attention.

However, as more and more gardeners switch to electronic ballasts, the FCC has started to take notice when it comes to both emitted and conducted radio frequency interference aka RFI. The more electronic ballasts that are in operation the greater the disruption. This can cause issues both within your home and throughout your community and neighborhood.

There are two types of RFI created by electronic ballasts. Both are regulated by the FCC, but each has its own distinctive characteristics. First, there’s emitted RFI which can disrupt electronic devices within your home that run on an RF signal. Such devices include some cable boxes, internet, Bluetooth devices, and even some hydroponic controller units currently on the market.

It is now a legal requirement to have RF filters on all electronic ballasts. Nanolux is the first company to provide you with both an emitted and conducted RF filter. Other companies may try to sell you one filter, but that only solves half the problem. Get the full solution. Stay quiet and keep others safe with our RF Filter Set for just $39.99 MSRP.

The Nanolux RF Filter set is designed for older style SE ballasts. They are not designed to be used on newer DE ballasts that run over 100Khz. The input filter can be used on a DE ballast but not the output filter.

RF FILTER SET – OUTPUT
Max Voltage: 600V
Max Current: 10A
Frequency: 50/60Hz
Max Conducted Emission Reduction: (0.45MHz – 30MHz) 25dB
Max Radiated Emission: (30MHz – 1000MHz) 25dB
Reference Standard: FCC Part 18 Class B

RF FILTER SET – INPUT
Input Voltage: 120/240/277Vac
Max Current: 15A
Frequency: 50/60Hz
Max Conducted Emission Reduction: (0.45MHz – 30MHz) 45dB
Max Radiated Emission Reduction: (30MHz – 1000MHz) 23dB
Reference Standard: FCC Part 18 Class B